FP200 Fire Rated Expanding Foam
Abesco FP200 FR Expanding Foam is a single pack Fire Rated polyurethane expanding foam, and is designed to prevent the spread of fire and smoke from one compartment to another through gaps and voids through fire rated walls or floors.Why use FP200 FR Expanding Foam
- Extremely versatile solution
- CFC free
- Excellent fill capabilities
- Very easy to install and finish
- Excellent smoke and draft seal capabilities
- Sound dampening properties
- Paintable and stainable
- Easily trimmed after curing
- Excellent adhesion to most building substrates
- Unaffected by moisture or humidity when cured
- Cures to provide a strong semi-regid seal
Where do I use FP200 FR Expanding Foam
Abesco FP200 FR Expanding Foam is suitable for use in most buildings where a seal is required for through penetrations in fire rated floors and walls.
Typical types of buildings FP200 FR Expanding Foam is commonly used are:
- Hotels
- Condominiums
- Office and Commercial buildings
- Hospitals
- Industrial buildings etc
What happens in a fire situation
Under fire conditions Abesco FP200 FR Expanding Foam provides an effective insulating barrier, thereby maintaining the integrity of the wall or floor and preventing the spread of fire from one compartment to another.
Ordering information
Code
|
Desc
|
Case Qty
|
Pallet Qty
|
Color
|
Size
|
20424 |
24oz FP200 FR Expanding Foam Can
|
12 |
816 |
Violet |
24 oz. |
20410 |
10oz FP200 FR Expanding Foam Can
|
12 |
2,100 |
Violet |
10 oz. |
Prior to 2024 color was pink |
Technical Information
Application Temperature: Min 41F (5C)
Surface
68-77F (20C-25C) Can
Can must be inverted for dispensing
Flammable during dispensing
Tack free time: 5-10 mins*
Cure time: 20-25 mins 1.5" Dia (38mm)*
Hardening time: 1.5 - 2 hrs*
Foam when cured has around 60% closed cell content
Specific gravity: 22-26 kg/m3
Water absorption: max 1% volume
Temp. resistance: -40F to 194F (-40C to 90C)
Tensile strength: 0,071 - 0,076 MPa
Elongation at break: 15 - 20%
Free expansion: 120%
* depending on temperature and humidity
Flame and smoke index: 10 & 35, Class A
rating
Flammability class: B1 according to DIN4102
part 1
Storage: 12 to 18 months 5°F to 68°F (10° to
20°C)
Higher temperatures can shorten storage life. Must be stored in
vertical position (upright)
VOC: VOC: 186.1 g/L in can, less than 2 g/L
cured (10+ days)
STC: 38
Dielectric Constant (relative static permittivity) 1.2 R: 7/inch (2.54 cm)